35 & 36 Ford Rumble and Standard Deck lid Skins

These deck lid skins fit both a 35 & 36 ford coupe or roadster. They are the same whether a rumble seat or a standard lid. The hole for the latch handle will be laid out and can be put in if specified upon order. The gaps will be just as stock with 3/16" on the sides and just under 1/4" top and bottom for opening clearance. The flange around the edge will be a 1 1/8" with a slight indent 3/8" inward to allow for the hemmed edge to cover the inner structure. For pricing or any questions contact Josh at 435-559-5156.

This panel was for a 50's Cadi and filled in between the rear window to the deck lid. We used the pullmax to install the steps in to the panel.

TRANS TUNNEL

This is a trans tunnel for a 27 model T. I made a cardboard template around the trans at the customers Home and then fabricated the tunnel to fit. The tunnel was shaped as one piece and had a mounting flange around the perimeter to be spot welded or bolted.

WHEEL TUBS

The wheel tubs on this project where fabricated to blend from the outer rear fenders though the bed making everything flow. We also fabricated the roll pan and rear bed posts.

36 FORD ROADSTER CONVERSION

The templates for these panels were from a 36 ford phaeton, intending to convert over a 36 ford coupe into a roadster.

36 STUDEBAKER PANEL

These panels are the rear pan on a 36 Studebaker and were made from 18 gauge sheet metal and was shaped as one piece. The main shape was done on the Yoder power hammer and the details were installed using the planishing hammer and pullmax.

PROJECTS

These are a couple of the projects we have been working on over the past few of months.